Showing posts with label Tip finds. Show all posts
Showing posts with label Tip finds. Show all posts

Wednesday, January 20, 2016

Sometimes, tip finds have unintended consequences

We've found some pretty random stuff at the local tip shop over the last few years. It's become our favourite place. Most of the people who work there know us now, and have some idea of what we're doing. We're sure we aren't the only ones, but it's a nice sort of atmosphere.

We've bought a stack of timber...


Tiles...


Pavers...

Loads of barbed wire...


Kyle found an old leather punching bag - I don't think he plans to use it, he just likes how it looks...


But the weirdest one yet was this piece of timber...


It's almost 2m long, just less than 1m wide, and about 10cm thick. It has a little rot on the other side, but we're not too worried as it's just the heartwood that's crumbled. We're not exactly sure, but as it took 4 people and a forklift to get it into our van we think it weighs somewhere between 200 and 300kg. Three of us got it out ok (Kyle and I mostly, but assisted by my sister Rachael), because we drove the van right up to the shipping container and just sort of pushed it along the ground on it's side. I'm not really sure how we're going to get it to wherever we're going to use it.

To give you some idea, though, it was a bit of a wet day when we took it to the property, and we weren't paying close enough attention, so we ended up getting bogged when we first arrived. After much messing around with bricks and timber offcuts trying to un-bog ourselves...


... eventually we had the bright idea of taking the big lump of timber out of the back, and all of a sudden we weren't bogged anymore!

Saturday, October 10, 2015

Reclaiming Timber

We've spent almost every weekend for the past 2 years or so at the local tip - there's a shop attached, where they sell on anything that looks vaguely reusable for dirt cheap. This weeks tip finds included two large rolls of barbed wire, an assortment of tools/hinges/other odds and ends, and a collection of hardwood beams that all matched. $40 for the lot was pretty good.

The wood had a lot of nails still in it, but as they were all sort of sticking out a bit we figured we'd just spend an afternoon pulling them out before we do anything with them.


It's a bit tough at first, but once you get the hang of it it's sort of meditative. There's a big sense of triumph when you finally pull out a really tough one. And then you get to play silly games, like who pulls the nail that's bent the most (awarded today to the below offender who was the source of at least 20 minutes frustration), and guessing "what was this all used for originally anyway?" (we suspect someone's deck).


And then there are some nails that are buried deep, and surprise you when they finally get hammered out by being screws after all.


Sunday, April 26, 2015

I spy a solar oven, an ash grate, and the walls of a house!

Kyle and I visit the local tip almost every weekend, and have done for over a year now. Our latest finds, pictured below, were purchased this morning for a grand total of $40.


The slightly rusty but very sturdy white box is going to get de-rusted, repainted, decorated internally with insulation and al-foil and become a solar oven.

The rolls of barbed wire will begin our collection for building either our house or water tanks or any number or random other things with earthbags. We've avoided barbed wire until now as we were sure we'd need special galvanised stuff or something, but this was just too perfect to pass up so we figure after this we'll just pick up any other bits of barbed wire we find - there's heaps of it around for cheaps.

The rusty looking bedframe thing is just welded together angle iron, so along with the rebar will be ripped apart with an angle grinder and hacksaw, then welded together form the ash grate for our soon-to-be barrel oven. Kyle's going to slowly put the pieces for the barrel oven together over the next month or two as it will likely be one of the first things we build on site after settlement on the land itself. We bought a mig welder about a month ago on GumTree for $100, so we're all set!

The random piece of some kind of hardwood will be added to Kyle's extensive timber collection. We think that to buy the equivalent to Kyle's collection new would cost several thousand dollars at least, but we've spent maybe $300 on it over the last two years.

The really odd find was the yellow fluttering-looking things on top of the box. These are flags, made of wire stakes and light high-vis plastic. We know we'll need something along these lines for marking out either buildings themselves or, later on, contours on the land for swales and dams to control water flow down the hill. These ones were a bit wet, so the flags were all stuck together, but there were about 30 of them and since we know we'll need something like this eventually we might as well grab them now. One less thing to buy later on.

Not bad for $40! Buying building materials this way does tend to make budgeting a challenge, though.